#VERSION=4
# dplus configuration file
[config]
# maximum concurrent dv dongle users, adjust based on your internet bandwidth
maxremoteusers=4
# maximum concurrent linked modules
maxremotegateways=2
# don't print errors from gateways.txt and users.txt
nomngerrors=1
# internalethernet is the device pointing towards the RP2C
internalethernet=enp6s0
# externalethernet is the device pointing towards the internet
externalethernet=enp2s0
# restrict linking/unlinking to admins
allowadminlinkingonly=0
allowadminunlinkingonly=0
# restrict linking/unlinking to registered users only
allowreguserlinkingonly=1
allowreguserunlinkingonly=0
# play the "remotesystemlinked" message every X minutes if non-zero and linked
linknotifyminutes=0
# customize the registration link URL on the dplus dashboard web page
# for centos:
#registrationurl=https://W4DOC.dstargateway.org/Dstar.do
# for almalinux:
#registrationurl=https://W4DOC.dstargateway.org/Dstar
# for central regist server:
#registrationurl=https://regist.dstargateway.org/
#
[adminusers]
# Admin users may link/unlink the gateway and do both tx and rx
# and have no idle timeout.
# Pins are limited to 8 numeric characters.
# If no pin is specified then none will be required for the user
# use an * in the callsign field as a wildcard allowing everyone.
#CALLSIGN;PIN
#AA4RC;1234
#
[allowedusers]
#CALLSIGN;PIN;ro (for rx only) or rw (for tx/rx)
# Pins are limited to 8 numeric characters
# If no pin is specified then none will be required for the user.
# Use an * in the callsign field as a wildcard allowing everyone.
# Note that registered users are automatically given rw permission
# so you should not have to change this value.  If you change this
# to rw, you will not be able to link to other systems.
*;;ro
#AA4RC;;ro
#AA4RC;1234;rw
#
[deniedusers]
# Ignored if a user other than * is used in the [alloweduser] section.
# Only callsigns are used in this section and * is not allowed.
#
[allowedgateways]
*
#
[deniedgateways]
# Ignored if a gateway other than * is used in the [allowegateways] section.
# Only callsigns are used in this section and * is not allowed.
[alloweddvdongles]
# Use * for all dongles or 8 character dv dongle serial number to restrict
*
#
[denieddvdongles]
# Ignored if a dvdongles other than * is used in the [allowedvdongles] section.
# Only 8 character dvdongles are used in this section and * is not allowed.